• Dymonic.
• Spectrem 2.
• Proglaze.
• Tremflex 834.
• Dymeric 240.
• 440 Glazing Tape.
• Polyshim II Glazing Tape.
• VISIONstrip®.
• Foam Tape.
• Glazing Compound.
• Backer Rod.
• Gun Foam And Cleaner.
• Xylol.
• MEK.
• Deep Lube.
• White Grease.
• Freez-It Spray.
• Film Guard Cleaner.

Dymonic

Dymonic is a high performance, low modulus, one_component, moisture curing, modified polyurethane joint sealant.

Basic Uses:

Dymonic is specifically developed for sealing dynamically moving joints such as: expansion and control joints, precast concrete panel joints, curtain wall joints and perimeter caulking (window, doors, panels, radon mitigation, bedding of mullions and frames, etc).

Spectrem 2

Spectrem 2 is a medium modulus, one part, high performance, neutral cure silicone sealant ideal

Basic Uses:

Spectrem 2 is suitable for both caulking and glazing applications, including cap beads, toe beads,

Stock Colors:

Proglaze

Proglaze is a one_part, moisture curing, acetoxy, silicone sealant, easily gunned under all types of

Basic Uses:

Proglaze provides a high performance seal for a wide variety of glazing applications such as cap

Stock Colors:

Tremflex 834

Tremflex 834 is a pure acrylic latex sealant formulated to provide a fast_setting pliable seal with

Basic Uses:

Tremflex 834 can be used for general purpose interior caulking and as a back bedding glazing

Stock Colors:

Dymeric 240 is a three component, chemically curing, epoxidized polyurethane sealant specially formulated for dynamically moving building joints.

Dymeric 240 is a non_sag general purpose sealant providing flexible, long life, durable, weathertight seals for both new construction and renovation projects in many types of buildings. Uses will include: pre_cast, masonry, metal curtainwall and perimeter joints of door and window frames.

Tremco 440 Tape is a 100% solid Polyisobutylene_cross linked butyl, preformed sealant.

Tremco 440 Tape is used for non_compression glazing of vision lites and spandrel panels in PVC, metal and wood frames, in low rise building construction. Tremco 440 Tape is also used for lap sealing between panels such as steel, aluminum and porcelain as well as a variety of other joints subject to shear between similar and dissimilar materials.

POLYshim II Tape is a 100% solids, highly adhesive and elastic, cross linked butyl preformed tape with a continuous integral EPDM shim.

Basic Uses:

POLYshim II Tape is used in compression glazing systems wherever the design calls for high performance glazing of curtain wall, unitized curtain walls, punched and ribbon window systems and sloped glazing applications.

VISIONstrip® is a precision extruded glazing medium consisting of an EPDM rubber extrusion positioned at the sightline with a 100% solids, highly adhesive and elastic, cross linked butyl preformed sealant bonded below. A single component profile achieving a positive_wet seal between the metal and glass surfaces while providing a clean gasket appearance at the sightline.

Foam Glazing Tape is a closed_cell vinyl foam sealant in tape form. The adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure.

It can be used for face glazing wood and metal window frames. Its adhesion to both glass and sash is excellent, and forms a dependable air_and watertight seal that resists sagging, shrinking, chalking and cracking.

Sof® Rod is a state_of_the_art sealant backing material combining the best properties of both open and closed cell backer rods in a single, trouble_free product. Sof® Rod is a continuous length of extruded polyolefin foam made with a non_absorbent outer skin and a highly resilient interior network of open and closed cells. Sof® Rod will not out_gas if ruptured.

This is a low expansion, high yield, quick cure foam. Becomes tack free in under 10 minutes and dries in one hour. Gun application is much faster than with convention aerosol cans. Easy one hand operation, no mess or cleanup, and the foam is always ready to use. The gun cleaner is used when a can of foam is not mounted on the gun.

Use around window and door frames. Insulates and seals. It can be used in temperatures from 60º to 95º F (15º to 35º C).

It is as an excellent way to clean metal caulking guns, tools or dispensing equipment of uncured sealants, mastics and adhesives. It's also excellent for removing oils and contaminants from aluminum surfaces prior to sealant application.

MEK (Methyl_Ethyl_Ketone) is a good solvent for general cleanup.  Similar to acetone, MEK dries slower though which allows time for   Because MEK is water_soluble, it should be used for cleaning metal before caulking when temperatures are below 40 degrees F (4 degrees C) to assist in drying of a frost_containing joint.

A deep penetrating, natural, water displacing lubricant. Deep Lube is 40% high quality light oil, and contains molybdenum disulfide (Molly), a superior, all natural friction fighter.  Deep Lube does not contain turpentine or ozone harming fluorocarbons and has a pleasant scent.

Deep Lube works great to displace and eliminate moisture, penetrate rust, drive away dirt, rust, oil, grease, protect against corrosion, and much more.

White Grease Lubricant is a heavy_bodied aerosol spray lube that frees metal moving parts.  It clings to sprayed areas to give good lubricating performance and keep things working right..

Basic Uses:

Getting the center out of a circle scored in glass for speak tubes has never been easy, but this new system makes this tough job easier than it has ever been. Freeze_It Spray propellant is used to run a scored circle without any tapping. Doing it this way, the run will have no flares.

Send mail to ron@sillikerglass.com with questions or comments about this web site.
Copyright © 2005 Silliker Glass
Last modified: May 21, 2008